Blinds are posh, beautiful, and ever so fancy. But sometimes, they can malfunction and refuse to stay up when you want them to. This can be frustrating and annoying, especially if you need to adjust your blinds frequently.
But don’t worry, there are some easy fixes you can try to solve this problem and make your blinds work properly again. In this guide, we will show you how to fix blinds that won’t stay up for different types of blinds, such as roller blinds, roman blinds, venetian blinds, and cellular blinds.
To fix blinds that won’t stay up, you need to:
1 Check the cord or string and untangle any knots or twists.
2 Pull the blind down and bounce it from side to side.
3 Remove the plugs at the bottom and untie the knot in the string.
4 Replace or repair the cord lock or spring mechanism.
5 Apply rosin or glue to the slipping cord.
The first thing you need to do when your blinds won’t stay up is to check the cord or string that controls the movement of your blinds. Sometimes, the cord or string can get tangled, twisted, or stuck, which prevents the blinds from staying up.
To fix this, you need to pull the cord or string gently and look for any knots or twists. If you find any, you need to untangle them carefully and make sure the cord or string is smooth and straight. You can also use a comb or a brush to help you with this task.
If your blinds have a continuous loop cord, you need to check if the cord is properly aligned with the pulley system. If not, you need to adjust the cord until it is in sync with the pulley.
Another common reason why your blinds won’t stay up is because the tension in the cord or spring mechanism is too loose. This can happen over time due to wear and tear or improper use of your blinds.
To fix this, you need to pull the blind down as far as it will go and then bounce it from side to side a few times. This will help to reactivate the tension in the cord or spring mechanism and make your blinds stay up again.
You can also try lifting your blind up slightly and then releasing it quickly. This will create a snapping motion that will tighten the tension in the cord or spring mechanism.
Another possible reason why your blinds won’t stay up is because the string inside your blind is too long or too short. This can affect how your blind rolls up or down and how much tension it has.
To fix this, you need to remove the plugs at the bottom of your blind and untie the knot in the string. You can use a flat-head screwdriver or a pair of pliers to help you with this task.
Then, you need to adjust the length of the string according to your preference. You can make it shorter by cutting off some excess string or make it longer by adding some extra string. You can also use a tape measure or a ruler to help you with this task.
Once you have adjusted the length of the string, you need to tie a new knot at the end of it and replace the plugs at the bottom of your blind.
Another potential reason why your blinds won’t stay up is because the cord lock or spring mechanism inside your blind is broken or damaged. This can happen due to age, wear and tear, or improper use of your blinds.
To fix this, you need to replace or repair the cord lock or spring mechanism inside your blind. This may require some tools and skills, so you may want to consult a professional for this task.
To replace or repair the cord lock or spring mechanism, you need to remove your blind from the window and lay it flat on a clean surface. Then, you need to remove the end caps from the headrail of your blind by popping them off with a flat-head screwdriver.
You should see two cords coming out of each end cap. These are the lift cords that control the movement of your blind. You should also see a small metal device attached to one of these cords. This is the cord lock that holds your blind in place.
If your cord lock is broken or damaged, you need to replace it with a new one. You can order a replacement cord lock online or from your local hardware store. You need to make sure that the replacement cord lock is compatible with your blind type and size.
To replace the cord lock, you need to thread one end of each lift cord through the eye of the new cord lock. Then, you need to tie each lift cord to the corresponding cord inside your blind using a double knot. Make sure to tie them securely and evenly so that your blind will operate smoothly.
Then, you need to reattach the end caps to the headrail of your blind by snapping them back into place. You can also test your blind by raising and lowering it with the lift cords. Adjust the tension of the cords if needed by loosening or tightening the knots.
If your spring mechanism is broken or damaged, you need to repair it or replace it with a new one. You can order a replacement spring mechanism online or from your local hardware store. You need to make sure that the replacement spring mechanism is compatible with your blind type and size.
To repair or replace the spring mechanism, you need to remove your blind from the window and lay it flat on a clean surface. Then, you need to remove the end cap from the side of your blind that has the spring mechanism by popping it off with a flat-head screwdriver.
You should see a metal tube with a spring inside it. This is the spring mechanism that controls the tension of your blind. You should also see a metal pin that connects the spring mechanism to the headrail of your blind.
If your spring mechanism is broken or damaged, you need to replace it with a new one. To do this, you need to pull out the metal pin and slide out the old spring mechanism from the metal tube. Then, you need to slide in the new spring mechanism into the metal tube and insert the metal pin back into place.
If your spring mechanism is not broken or damaged, but just needs some adjustment, you can do this by turning the metal pin clockwise or counterclockwise. This will increase or decrease the tension of the spring mechanism and make your blind stay up or down.
Then, you need to reattach the end cap to the side of your blind that has the spring mechanism by snapping it back into place. You can also test your blind by raising and lowering it with your hand. Adjust the tension of the spring mechanism if needed by turning the metal pin.
Another possible solution for blinds that won’t stay up is to apply some rosin or glue to the slipping cord. This will create some friction and prevent the cord from sliding down.
Rosin is a sticky substance that is used to tighten up violin strings and can be purchased at a music store. Glue is a common household item that can be used for various purposes.
To apply rosin or glue to the slipping cord, you need to pull down your blind as far as it will go and locate the cord that is slipping. Then, you need to apply some rosin or glue to the cord using a brush or a cotton swab. Make sure to apply it evenly and sparingly along the length of the cord.
Then, you need to let the rosin or glue dry completely before raising your blind again. This may take some time depending on the type and amount of rosin or glue you used.
You can also test your blind by raising and lowering it with the lift cords. Adjust the amount of rosin or glue if needed by applying more or less of it.
Blinds are a convenient and stylish way to control the light and privacy in your home. But sometimes, they can malfunction and refuse to stay up when you want them to.
To fix blinds that won’t stay up, you need to check the cord or string, pull the blind down and bounce it, remove the plugs at the bottom and untie the knot, replace or repair the cord lock or spring mechanism, or apply rosin or glue to the slipping cord.
If you have any questions or need more help, feel free to contact us at Huetifulhomes.com. We are always happy to assist you with your home decor needs.
Dale is the colorful mind behind HuetifulHomes.com, where he shows you how to create a home that is as fun and fabulous as you are. He has a passion for color and a knack for DIY, with years of interior design experience he shares his tips and tricks on how to create a home that reflects your personality and style. He believes that color is the key to happiness, and he wants to help you make your home more Huetiful.
