How To Fix Blinds That Won’t Turn: QUICK FIX

how-to-fix-blinds-that-wont-turn-quick-fix

You love your blinds right they make any room look posho wosho. But like any other product, they may sometimes malfunction or get damaged. If the slats on your blinds won’t turn or tilt, you may wonder: how to fix them? The answer is: you can do it yourself with some tools and materials. In this post, we will show you how to fix blinds that won’t turn using some simple steps and tips.

How to fix blinds that won’t turn? To fix blinds that won’t turn, you need to identify the problem and the type of blind. You also need to follow the instructions and recommendations from the manufacturer.

You may need some tools and materials, such as a lubricant spray, a screwdriver, pliers, scissors, a replacement rod or wand, or a replacement tilt mechanism.

Generally, you can use the following methods to fix your blinds that won’t turn:

  • Use lubricant spray to fix rotation issues.
  • Adjust blinds that won’t turn.
  • Remove items that may be jamming the rod or wand.
  • Replace a broken rod or wand.
  • Replace a broken tilt mechanism.

How to use lubricant spray to fix rotation issues

One of the easiest ways to fix blinds that won’t turn is to use a lubricant spray such as WD-40. This can help loosen any friction or rust that may be preventing the rod or wand from rotating properly. Here are some steps on how to use lubricant spray to fix rotation issues:

  • Remove your blinds from the window by lifting them out of the brackets or clips that hold them in place.
  • Lay your blinds flat on a clean surface and fully extend them.
  • Locate the rod or wand that controls the tilt of the slats and where it connects to the headrail of the blinds.
  • Spray a small amount of lubricant on the connection point and let it sit for a few minutes.
  • Gently twist the rod or wand back and forth until it rotates smoothly and evenly.
  • Wipe off any excess lubricant with a cloth and reinstall your blinds on the window.

Ceiling Lamp above a Table in a Kitchen

How to adjust blinds that won’t turn

Another easy way to fix blinds that won’t turn is to adjust them manually with your hands. Sometimes, the slats may be backward or overlapping and simply need to be twisted or separated into the right position. Here are some steps on how to adjust blinds that won’t turn:

  • Remove your blinds from the window by lifting them out of the brackets or clips that hold them in place.
  • Lay your blinds flat on a clean surface and fully extend them.
  • Check each slat individually and see if any of them are backward or overlapping.
  • Use your fingers to gently twist or separate the slats until they are straight and even.
  • Reinstall your blinds on the window and test them by turning the rod or wand.

How to remove items that may be jamming the rod or wand

Another possible cause of blinds that won’t turn is something jamming the rod or wand inside the headrail. This could be dirt, dust, debris, or even insects that have accumulated over time and are blocking the movement of the rod or wand. Here are some steps on how to remove items that may be jamming the rod or wand:

  • Remove your blinds from the window by lifting them out of the brackets or clips that hold them in place.
  • Lay your blinds flat on a clean surface and fully extend them.
  • Locate the rod or wand that controls the tilt of the slats and where it connects to the headrail of the blinds.
  • Use a screwdriver or pliers to remove the end caps on each side of the headrail and expose the rod or wand inside.
  • Use a vacuum cleaner with a brush attachment or a can of compressed air to blow away any dirt, dust, debris, or insects that may be jamming the rod or wand.
  • Replace the end caps on each side of the headrail and reinstall your blinds on the window.

Room with Armchair and TV

How to replace a broken rod or wand

Another possible cause of blinds that won’t turn is a broken rod or wand. This could happen due to wear and tear, excessive force, or accidental damage. If the rod or wand is bent, cracked, or snapped, you may need to replace it with a new one. Here are some steps on how to replace a broken rod or wand:

  • Remove your blinds from the window by lifting them out of the brackets or clips that hold them in place.
  • Lay your blinds flat on a clean surface and fully extend them.
  • Locate the rod or wand that controls the tilt of the slats and where it connects to the headrail of the blinds.
  • Use a screwdriver or pliers to remove the end caps on each side of the headrail and expose the rod or wand inside.
  • Cut off any knots or tangles on the cord that attaches the rod or wand to the tilt mechanism with scissors.
  • Pull out the broken rod or wand from the headrail and discard it.
  • Insert a new rod or wand that is the same size and shape as the broken one into the headrail and attach it to the tilt mechanism with the cord.
  • Tie a knot at the end of the cord and secure it to the tilt mechanism.
  • Replace the end caps on each side of the headrail and reinstall your blinds on the window.

How to replace a broken tilt mechanism

Another possible cause of blinds that won’t turn is a broken tilt mechanism. This is the device inside the headrail that controls the movement of the slats when you turn the rod or wand. If the tilt mechanism is worn out, damaged, or defective, you may need to replace it with a new one. Here are some steps on how to replace a broken tilt mechanism:

  • Remove your blinds from the window by lifting them out of the brackets or clips that hold them in place.
  • Lay your blinds flat on a clean surface and fully extend them.
  • Locate the rod or wand that controls the tilt of the slats and where it connects to the headrail of the blinds.
  • Use a screwdriver or pliers to remove the end caps on each side of the headrail and expose the rod or wand and the tilt mechanism inside.
  • Cut off any knots or tangles on the cord that attaches the rod or wand to the tilt mechanism with scissors.
  • Pull out the rod or wand and the tilt mechanism from the headrail and discard them.
  • Insert a new tilt mechanism that is compatible with your type of blind into the headrail and attach it to the cord.
  • Tie a knot at the end of the cord and secure it to the tilt mechanism.
  • Insert a new rod or wand that is compatible with your type of blind into the headrail and attach it to the tilt mechanism with the cord.
  • Tie a knot at the end of the cord and secure it to the tilt mechanism.
  • Replace the end caps on each side of the headrail and reinstall your blinds on the window.

Person Holding Brown Window Blinds

FAQs

Q: How do I fix horizontal blinds that won’t turn?

A: The methods for fixing horizontal blinds that won’t turn are similar to those for vertical blinds. You can use lubricant spray, adjust the slats, remove any jams, replace a broken rod or wand, or replace a broken tilt mechanism. However, some horizontal blinds may have different types of rods, wands, or tilt mechanisms than vertical blinds, so make sure you check with the manufacturer before buying any replacement parts.

Q: How do I fix wood blinds that won’t turn?

A: Wood blinds are a type of horizontal blinds that are made of natural wood slats. They are more durable and elegant than plastic or metal blinds, but they may also require more care and maintenance. To fix wood blinds that won’t turn, you can use lubricant spray, adjust the slats, remove any jams, replace a broken rod or wand, or replace a broken tilt mechanism. However, you should avoid using water or harsh chemicals on wood blinds, as they may damage or warp the wood. You should also avoid exposing wood blinds to direct sunlight, heat, or humidity, as they may cause fading, cracking, or warping.

Q: How do I fix faux wood blinds that won’t turn?

A: Faux wood blinds are a type of horizontal blinds that are made of synthetic materials that mimic the look and feel of natural wood. They are more affordable and resistant than wood blinds, but they may also have some drawbacks. To fix faux wood blinds that won’t turn, you can use lubricant spray, adjust the slats, remove any jams, replace a broken rod or wand, or replace a broken tilt mechanism. However, you should avoid using water or harsh chemicals on faux wood blinds, as they may damage or discolor them. You should also avoid exposing faux wood blinds to direct sunlight,

Adding color to the world, one room at a time. 
© 2023 Huetiful Homes. All rights reserved.