Blinds are a fantastic way to add some flair and function to your windows, but they can also be a hassle to install. If you don’t have brackets or don’t want to drill holes in your walls, you may think that hanging blinds is impossible. But think again! You can hang blinds without brackets and nail your window style with some clever alternatives. Here’s how to hang blinds without brackets and make your windows look amazing.
How to hang blinds without brackets using command strips
One of the easiest ways to hang blinds without brackets is to use command strips. These are adhesive strips that work like Velcro and can hold up to 7.2 kg per set. They are perfect for hanging lightweight blinds made of fabric, metal, or vinyl.
To hang blinds without brackets using command strips, follow these steps:
- Clean the surfaces where you will attach the command strips with rubbing alcohol and let them dry. This will ensure a strong bond between the strips and the surfaces.
- Cut vertical strips of command strips that match the height of your blind’s headrail and apply them to its rear surface at intervals of 15 to 30 centimetres (depending on how heavy the blind is) and press down firmly.
- Mark out precisely where the blind is going to hang with a spirit level and a pencil, remove the red liner from the command strips, lift and hold the headrail to the pencil-drawn guideline and press it firmly to the surface for a few seconds.
- Wait for at least an hour before hanging your blind on the headrail. This will allow the command strips to reach their maximum holding strength.
How to hang blinds without brackets using tension rods
Another way to hang blinds without brackets is to use tension rods. These are rods that fit inside your window frame and hold themselves in place with spring tension. They are ideal for hanging fabric blinds that have a pocket or a loop at the top.
To hang blinds without brackets using tension rods, follow these steps:
- Measure the width of your window frame and buy a tension rod that matches or slightly exceeds it. You can also adjust the length of some tension rods by twisting them.
- Slide your blind onto the tension rod through the pocket or loop at the top of the blind.
- Place one end of the tension rod inside your window frame and compress the other end slightly to fit it inside the opposite side of the frame. Make sure the rod is level and secure.
- Adjust the length and position of your blind as needed.
How to hang blinds without brackets using self-adhesive blinds
The simplest way to hang blinds without brackets is to use self-adhesive blinds. These are paper blinds that have a sticky strip at the top that you can attach directly to your window frame or glass. They are great for temporary or low-budget window treatments.
To hang blinds without brackets using self-adhesive blinds, follow these steps:
- Measure the width and height of your window and cut your self-adhesive blind accordingly. You can use scissors or a utility knife for this.
- Peel off the protective liner from the sticky strip at the top of the blind.
- Align the top edge of the blind with the top edge of your window frame or glass and press it firmly in place.
- Adjust the length of your blind by folding or cutting off any excess paper at the bottom.
FAQs
- How do I remove blinds without brackets? You can remove blinds without brackets by following these tips:
- For command strips, pull down on the tab at the bottom of each strip until it releases from the surface. Do not pull on the blind or the headrail as this may damage them or the surface.
- For tension rods, compress one end of the rod slightly and pull it out of the window frame. Slide off your blind from the rod.
- For self-adhesive blinds, peel off the blind from the top edge of your window frame or glass. Use a hairdryer or rubbing alcohol to remove any sticky residue.
- How do I choose blinds for my windows? You can choose blinds for your windows by considering these factors:
- The size and shape of your windows
- The style and colour of your room
- The amount of light and privacy you want
- The type and material of your blinds
- The budget and maintenance you have
- How do I measure my windows for blinds? You can measure your windows for blinds by following these steps:
- Decide whether you want to install your blinds inside or outside the window recess.
- Measure the width of your window from left to right at three different points: top, middle, and bottom. Use the smallest measurement for inside recess blinds and the largest measurement for outside recess blinds.
- Measure the drop of your window from top to bottom at three different points: left, middle, and right. Use the smallest measurement for inside recess blinds and add some extra length for outside recess blinds.
- Round up your measurements to the nearest millimeter and write them down.
Happy hanging!
Now you know how to hang blinds without brackets and nail your window style, you can enjoy your chic and practical windows without any hassle. Remember, if you need any help with choosing, measuring, or installing your blinds, you can always contact us at Huetifulhomes.com. We’re here to make your home decor dreams come true!?
