Wooden blinds are a classic and elegant way to dress up your windows, but they can also look outdated or clash with your decor over time. If you want to give your wooden blinds a fresh and modern makeover, you can paint them white with some paint and a little patience. Painting wooden blinds white is not difficult, but it does require some preparation and care. Here’s how to do it step by step.
Painting wooden blinds white can transform them from dull to dazzling, but you need to choose the right type of paint and follow the proper technique.
Step 1: Choose the paint
- The first thing you need to do is choose the type and color of paint you want to use for your wooden blinds.
- You can use any kind of paint that is suitable for wood, such as acrylic, latex, or enamel paint.
- You can also use spray paint if you prefer, but it can be more messy and fumy than brush-on paint.
- You need to choose a white color that matches your style and preference, such as bright white, off-white, or antique white.
- Make sure you have enough paint to cover both sides of all the slats of your wooden blinds.
Step 2: Remove and clean the blinds
- The next thing you need to do is remove the wooden blinds from the window and take them apart.
- You need to detach the slats from the headrail and the cords, and keep them in order.
- You also need to remove any hardware or brackets that are attached to the blinds.
- Then you need to clean the slats with a mild soap and water, and rinse them well.
- You can use a bathtub, a sink, or a hose to wash the slats, depending on their size.
- Let them dry completely before painting them.
Step 3: Set up a painting area
- The third thing you need to do is set up a painting area where you can paint the slats without making a mess.
- You need to choose a well-ventilated and protected area, such as a garage, a basement, or an outdoor space.
- You also need to cover the floor and any nearby objects with drop cloths, newspapers, or plastic sheets to prevent spills.
- You can use a clothesline, a rack, or some hangers to hang the slats vertically for painting, or you can lay them flat on a large surface.
Step 4: Paint the blinds
- The fourth thing you need to do is paint the slats with paint, following the instructions on the can or label.
- If you are using brush-on paint, you need to use a good-quality brush that is suitable for wood, such as an angled sash or a trim brush.
- If you are using spray paint, you need to shake the can well before using it, and hold it about 10 inches away from the slats.
- You need to apply the paint in thin and even coats, moving from side to side or top to bottom.
- You need to cover both sides of each slat with paint, and let each coat dry for about 15 minutes before applying another one.
- You need to apply two or three coats of paint for each side of each slat, depending on the coverage and color you want.
Step 5: Reassemble and rehang the blinds
- The last thing you need to do is reassemble and rehang the wooden blinds after they are fully dry.
- You need to reattach the slats to the headrail and the cords, making sure they are in the right order and direction.
- You also need to reattach any hardware or brackets that you removed from the blinds.
- Then you need to hang the wooden blinds back on the window, and adjust them as needed.
FAQs
Q: How long does it take to paint wooden blinds white? A: It depends on how many slats you have and how many coats of paint you apply, but it can take anywhere from a few hours to a few days. You need to allow enough time for each coat of paint to dry before applying another one, and for the final coat to cure before reassembling and rehanging the blinds.
Q: How much does it cost to paint wooden blinds white? A: It depends on how much paint you use and how much it costs, but it can be much cheaper than buying new wooden blinds. You can find paint for as low as $10 per quart at most hardware stores or online retailers.
Q: How do I maintain painted wooden blinds? A: Painted wooden blinds are easy to maintain and don’t need much cleaning. You can dust them with a soft cloth or a vacuum cleaner attachment. You can also wipe them with a damp cloth if they get dirty. Avoid using harsh chemicals or abrasives that might damage the paint.
Wrap Up
Painting wooden blinds white is a fun and creative way to update your windows without spending a lot of money. You can choose any white color you like, and customize your wooden blinds to match your style. All you need is some paint, some basic tools, and some time. To paint wooden blinds white, you just need to choose the paint, remove and clean the blinds, set up a painting area, paint the blinds, and reassemble and rehang them. Then you can enjoy your new and improved wooden blinds.
