Do you love traveling in your RV and enjoying the scenic views from your windows? Do you also love having accordion blinds on your windows that can give you some shade, privacy, and coziness? If you answered yes to these questions, then you’re probably a fan of accordion blinds.?
Accordion blinds are a type of window covering that are made of pleated fabric that can be folded or unfolded with a cord or a spring mechanism. They are also known as pleated shades, cellular shades, or honeycomb shades. They are stylish, versatile, and easy to operate with a cord or a motor.
But what if your accordion blinds get broken or damaged? Maybe they get stuck, saggy, or frayed. How do you fix them without replacing them or spending too much money?
Don’t worry, we’ve got you covered. In this blog post, we’ll show you how to repair accordion blinds in RV in seven easy steps. You’ll need some common tools that you probably already have in your RV. Follow these steps and you’ll have your accordion blinds back in shape in no time. Let’s get started!?
To repair accordion blinds in RV, you need to remove the broken shade, remove the end caps from the top and bottom rail, remove the cords from the blind, attach new cord to the spring(s), replace cord bushings, re-string the pleated shade, position cords and replace rails, and reinstall retainer clips. This process may take some time and patience, but it will help you fix your blinds without replacing them or spending too much money.
To repair accordion blinds in RV, you will need:
The first step is to remove the broken RV shade from the window. To do this, you need to unscrew both tension cord retainers at the bottom of the blind from the wall. These are small plastic pieces that hold the cord in place and keep the blind taut. Then, unscrew one screw from each side of the top rail and slide it out from the brackets. Be careful not to damage the wall or the window frame as you remove the shade.
The next step is to remove the end caps from the top and bottom rail. The end caps are small plastic pieces that cover the ends of the rails and protect them from dust and dirt. To remove the end caps, you need to use a screwdriver or a pair of pliers to pry them off gently. You may need to wiggle them slightly or tilt them slightly to release them from the rails.
The third step is to remove the cords from the blind. The cords are thin nylon strings that run through the pleats of the fabric and connect to the springs on each side of the top rail. To remove the cords, you need to cut them with scissors or a knife near where they exit the end caps. Be careful not to cut yourself or damage the fabric as you do this.
The fourth step is to attach new cord to spring(s) if your old cord is broken or damaged. You can find replacement cord online or in hardware stores that match your blind size and color. To attach new cord to spring(s), you need to tie one end of the cord to one of the springs on one side of the top rail. Then, thread it through all the pleats of the fabric until you reach the other side of the top rail. Tie it to another spring on that side. Repeat this process for another cord if your blind has two cords.
The fifth step is to replace cord bushings if your old ones are worn out or missing. Cord bushings are small plastic pieces that fit into holes on each end cap and guide the cords through them smoothly. To replace cord bushings, you need to insert new ones into each hole on each end cap. Make sure they fit snugly and securely.
The sixth step is to re-string the pleated shade by adjusting the tension of the cords and springs. To do this, you need to turn the large clear wheel at each end of the top rail clockwise or counterclockwise until you get the desired tension. The wheel controls how much the spring extends or retracts, which affects how tight or loose the cord is. You want to have enough tension so that your blind stays up when raised and down when lowered, but not too much that it causes wrinkles or gaps in your fabric.
The seventh step is to position cords and replace rails by sliding them back into their brackets and end caps. To do this, you need to lay down your shade on a flat surface and make sure your cords are not twisted or tangled. Then, slide one end of your top rail into one bracket on your window frame or wall and secure it with a screw. Repeat this process for another end of your top rail and another bracket. Then, slide your bottom rail over your cords and make sure they cross in the middle. Replace the end caps on your bottom rail and thread the cords through the exit holes.
The final step is to reinstall retainer clips by screwing them back into the wall at the bottom of your blind. Retainer clips are small metal pieces that hold your cord in place and keep your blind taut. To reinstall retainer clips, you need to pull your cord down and hook it onto the clip. Then, screw the clip into the wall with a screwdriver or a drill. Repeat this process for another cord and another clip.
Q: How do I clean my accordion blinds in RV?
A: To clean your accordion blinds in RV, you can use a vacuum cleaner with an upholstery attachment or a soft brush to remove any dust or dirt. You can also use a damp cloth or sponge with some mild detergent to wipe down any stains or spots. Rinse them with clean water and let them dry completely before rehanging them.
Q: How do I install new accordion blinds in RV?
A: To install new accordion blinds in RV, you need to measure your window width and height, choose your mount type (inside mount or outside mount), mark your bracket positions, drill pilot holes and attach your brackets with screws, snap your top rail into your brackets, attach your springs to your top rail, thread your cord through your springs and fabric, position cords and replace bottom rail, attach end caps, and install retainer clips.
Q: How do I fix a broken fabric pleat on my accordion blinds?
A: If your fabric pleat on your accordion blinds is broken or torn, you may need to replace it with a new one. You can find replacement fabric pleats online or in hardware stores that match your blind color and size. To replace your fabric pleat, you need to remove your blinds from your window, remove the end caps from the top and bottom rail, remove the cords from the blind, unroll and detach the old fabric pleat from the rails, roll and attach the new fabric pleat to the rails, re-string the pleated shade, position cords and replace rails, and rehang your blinds on your window.
Congratulations! You’ve successfully repaired accordion blinds in RV. Now you can enjoy your beautiful and functional window coverings again. You’ll also notice that your blinds will work smoother and last longer, as they won’t have any broken or damaged parts anymore. And best of all, you won’t have to spend a fortune on new blinds or professional repairs. Hooray!?
We hope you found this blog post helpful and informative. If you did, please share it with your friends and family who might also have accordion blinds in their RVs. And if you have any questions or comments, feel free to leave them below. We’d love to hear from you. Thanks for reading and happy blind-ing!?
Dale is the colorful mind behind HuetifulHomes.com, where he shows you how to create a home that is as fun and fabulous as you are. He has a passion for color and a knack for DIY, with years of interior design experience he shares his tips and tricks on how to create a home that reflects your personality and style. He believes that color is the key to happiness, and he wants to help you make your home more Huetiful.
