Curtain rods are the hardware that support your curtains and allow you to hang them on your windows. Sometimes, you may need to put two curtain rods together to create a longer rod for a wider window or a double rod for layered curtains. However, putting two curtain rods together can be tricky and confusing, especially if you don’t know how to join them securely and seamlessly. Here are some steps on how to put 2 curtain rods together.
The best way to put 2 curtain rods together is to use a curtain rod connector or a dowel rod and some screws. You can also use a metal pipe or a PVC pipe and some glue. You can use different types of rods depending on the type and weight of your curtains. You can also use different methods of joining depending on the type and size of your rods.
Use a Curtain Rod Connector
The easiest way to put 2 curtain rods together is to use a curtain rod connector. This is a device that is designed to attach two poles together. It usually involves unscrewing the rods at the mid-point, inserting the connector into the ends of the rods, and then screwing the rods back onto the connector
To use a curtain rod connector, you need two curtain rods of the same diameter, a curtain rod connector of the same diameter, and a screwdriver.
- To use a standard connector, which is a metal or plastic tube with threads on both ends, unscrew the finials or end caps from both rods and set them aside. Insert one end of the connector into one end of one rod and twist it until it is secure. Insert the other end of the connector into one end of the other rod and twist it until it is secure. Screw the finials or end caps back onto the rods.
- To use an adjustable connector, which is a metal or plastic tube with an inner rod that slides in and out, unscrew the finials or end caps from both rods and set them aside. Loosen the screws on both ends of the connector with a screwdriver and slide out the inner rod until it reaches the desired length. Insert one end of the inner rod into one end of one rod and tighten the screw with a screwdriver. Insert the other end of the inner rod into one end of the other rod and tighten the screw with a screwdriver. Screw the finials or end caps back onto the rods.
Use a Dowel Rod and Some Screws
Another way to put 2 curtain rods together is to use a dowel rod and some screws. This is a DIY method that involves cutting a wooden dowel rod to fit inside the ends of the rods and securing them with screws
To use a dowel rod and some screws, you need two curtain rods of any diameter, a wooden dowel rod of slightly smaller diameter, a saw, some wood glue, some screws, a drill, and a screwdriver.
- To use a dowel rod and some screws, cut the dowel rod to about 6 inches long with a saw. Apply some wood glue to one end of the dowel rod and insert it into one end of one rod until it reaches halfway. Apply some wood glue to the other end of the dowel rod and insert it into one end of the other rod until it reaches halfway. Drill two holes through each rod where they meet the dowel rod with a drill. Insert screws through each hole into the dowel rod with a screwdriver.
Use a Metal Pipe or a PVC Pipe and Some Glue
A third way to put 2 curtain rods together is to use a metal pipe or a PVC pipe and some glue. This is another DIY method that involves cutting a metal pipe or a PVC pipe to fit inside the ends of the rods and securing them with glue3
To use a metal pipe or a PVC pipe and some glue, you need two curtain rods of any diameter, a metal pipe or a PVC pipe of slightly smaller diameter, a saw, some epoxy glue or PVC cement, and some clamps.
- To use a metal pipe or a PVC pipe and some glue, cut the pipe to about 6 inches long with a saw. Apply some epoxy glue or PVC cement to one end of the pipe and insert it into one end of one rod until it reaches halfway. Apply some epoxy glue or PVC cement to the other end of the pipe and insert it into one end of the other rod until it reaches halfway. Clamp the rods together until the glue or cement dries.
FAQs
- How do I measure my rods for my connectors or pipes?
- To measure your rods for your connectors or pipes, use a tape measure to measure the diameter of your rods and compare it with the diameter of your connectors or pipes. They should match or be slightly larger than your rods.
- How do I choose the right type of rods for my curtains?
- To choose the right type of rods for your curtains, check the weight and style of your curtains and compare it with the type and size of your rods. They should be able to support your curtains without bending or breaking and complement your curtains without overpowering them.
- How do I adjust or remove my rods if I make a mistake?
- To adjust or remove your rods if you make a mistake, use a screwdriver to loosen or remove the screws that hold them together. If you are using connectors, unscrew the finials or end caps from both rods and twist them off the connector. If you are using glue or cement, use a knife or a saw to cut through the pipe where it meets the rods.
Final Thoughts
Putting 2 curtain rods together can be an easy and fun way to create a longer rod for a wider window or a double rod for layered curtains. You can use different types of connectors, pipes, or screws depending on the type and diameter of your rods. You can also use different methods of joining depending on the type and size of your connectors, pipes, or screws. With these steps on how to put 2 curtain rods together, you can make your windows more beautiful and functional.
Dale is the colorful mind behind HuetifulHomes.com, where he shows you how to create a home that is as fun and fabulous as you are. He has a passion for color and a knack for DIY, with years of interior design experience he shares his tips and tricks on how to create a home that reflects your personality and style. He believes that color is the key to happiness, and he wants to help you make your home more Huetiful.
