Blinds are great for adding style and privacy to your home, but they can also be a pain when they break. Whether your blinds won’t go up or down, have holes or tears, or fall out of the window, there’s no need to panic. You can fix most common blind problems yourself with some simple tools and tips. Here’s how to fix blinds like a pro and save yourself some money and hassle.
How to fix blinds that won’t go up or down
If your blinds are stuck in one position, it could be because the cord or string is tangled or knotted. To fix this, you need to pull the cord gently and check for any knots or twists. You can also try lifting and bouncing the blinds from side to side to loosen the cord.
Sometimes, the cord lock mechanism at the top of the blinds may be jammed or broken. To fix this, you need to unhook the blinds from the window and open the top panel with a flat head screwdriver. Then, you can either release the cord lock by pushing it with a screwdriver or replace it with a new one if it’s damaged.
How to fix blinds with holes or tears
If your blinds have holes or tears, you can patch them up with a blind repair kit that you can buy from your local DIY store. The kit usually comes with adhesive tape that matches the color and material of your blinds.
To fix the holes or tears, you need to cut a piece of tape that is slightly larger than the damaged area and stick it on both sides of the blind. Make sure to smooth out any wrinkles or bubbles and trim any excess tape. You can also use a hairdryer to heat up the tape and make it stick better.
How to fix blinds that fall out or don’t rotate
If your blinds fall out of the window or don’t rotate properly, it could be because the strings that hold them together are loose or broken. To fix this, you need to remove the plugs at the bottom of the blinds and untie the knot in the string.
Then, you need to rethread the string through the holes in each slat, making sure to keep them aligned and tight. You can use a needle or a paper clip to help you with this. Once you reach the top of the blinds, tie a knot in the string and replace the plugs.
FAQs
- How do I clean my blinds? You can clean your blinds by dusting them with a microfiber cloth or a vacuum cleaner attachment. You can also wipe them with a damp cloth and mild soap if they are very dirty. Avoid using harsh chemicals or abrasive materials that may damage your blinds.
- How do I measure my blinds? You can measure your blinds by using a metal tape measure and following these steps:
- Decide whether you want to install your blinds inside or outside the window recess.
- Measure the width of your window from left to right at three different points: top, middle, and bottom. Use the smallest measurement for inside recess blinds and the largest measurement for outside recess blinds.
- Measure the drop of your window from top to bottom at three different points: left, middle, and right. Use the smallest measurement for inside recess blinds and add some extra length for outside recess blinds.
- Round up your measurements to the nearest millimeter and write them down.
- How do I install my blinds? You can install your blinds by following these steps:
- Mark the position of the brackets on your wall or window frame with a pencil and drill the holes.
- Fix the brackets in place with screws and rawlplugs, making sure they are level and aligned.
- Clip or slide your blind into the brackets and secure it with screws or clips if needed.
- Attach the cord tensioning device (P-Clip) to the wall or window frame at least 1.5m above the floor and clip the cord into it. This is a child safety device that prevents children from getting tangled in the cord.
That’s a wrap!
Now you know how to fix blinds like a pro, you can enjoy your beautiful windows without any worries. Remember, if you need any help with choosing, measuring, or installing your blinds, you can always contact us at Huetifulhomes.com. We’re here to make your home decor dreams come true!?
