How To Fix Magnetic Window Blinds

how-to-fix-magnetic-window-blinds

Magnetic window blinds are a convenient and easy way to add privacy and light control to your windows. They are made of horizontal slats that are attached to a magnetic strip that sticks to the metal frame of your window. They can be raised and lowered with a magnetic operator that slides along the side of the window. Magnetic window blinds are ideal for doors, windows, and skylights that have metal frames and do not require any drilling or hardware to install.

However, magnetic window blinds can also have some problems over time. They can get dirty, bent, or damaged by dust, moisture, or impact. They can also lose their magnetism or get disengaged from the operator, making them hard to operate. If you have magnetic window blinds that need some fixing, don’t worry. We’ve got you covered. In this post, we’ll show you how to fix magnetic window blinds using some simple tools and tips. Whether you need to clean, straighten, or re-engage your magnetic window blinds, we have a method that works for you.

How to fix magnetic window blinds: The best way to fix magnetic window blinds depends on the type of problem you have. If your blinds are dirty, you can use a damp cloth or a mild cleaner to wipe them down. If your blinds are bent or damaged, you can use a screwdriver to loosen the brackets and gently bend them back into shape. If your blinds have lost their magnetism or got disengaged from the operator, you can use some strong adhesive and a few magnets to fix them.

How to Clean Magnetic Window Blinds

Cleaning your magnetic window blinds regularly can help prevent dust and dirt buildup and keep them looking fresh and new. You can use a damp cloth or a mild cleaner to clean your magnetic window blinds.

To clean your magnetic window blinds:

  • Open the blinds fully and lower them to their full length.
  • Tilt the slats so they are fully open.
  • Use a damp cloth or a sponge dipped in warm water and a few drops of dish soap to wipe each slat gently from top to bottom or side to side. Do not rub or scrub too hard, as this might damage the surface of the blinds.
  • Rinse the cloth or sponge frequently in clean water and repeat until all slats are clean.
  • Dry each slat with a clean rag or microfiber towel. Do not leave them wet, as this might cause rusting or discoloration.

Magnetic Grey Blackout Thermal Roller Blind

How to Straighten Magnetic Window Blinds

If your magnetic window blinds are bent or damaged by impact or pressure, you can try to straighten them by loosening the brackets and gently bending them back into shape. You will need a screwdriver and some patience for this method.

To straighten your magnetic window blinds:

  • Open the blinds fully and lower them to their full length.
  • Tilt the slats so they are fully open.
  • Use a screwdriver to loosen the screws that hold the brackets in place.
  • Remove the bracket and gently bend the blinds back into shape.
  • Locate the problem area on the blinds. It is usually where the blinds are most bent or damaged.
  • Use your hands or pliers to carefully straighten the slats as much as possible.
  • Replace the bracket and tighten the screws securely.

Magnetic Door Blinds | Wayfair

How to Re-engage Magnetic Window Blinds

If your magnetic window blinds have lost their magnetism or got disengaged from the operator, you can try to re-engage them by using some strong adhesive and a few magnets. You will need some super glue, some small magnets, and some masking tape for this method.

To re-engage your magnetic window blinds:

  • Open the blinds fully and lower them to their full length.
  • Tilt the slats so they are fully open.
  • Use some masking tape to mark where the magnets on the blind strip align with the magnets on the operator.
  • Remove the blind strip from the window frame by peeling off the adhesive backing.
  • Apply some super glue on each magnet on the blind strip and press a small magnet on top of it. Make sure they are aligned with the markings on the tape.
  • Let the glue dry completely before removing the tape.
  • Reattach the blind strip to the window frame by pressing it firmly into place.
  • Move the operator up along the track until you hear a click then continue lifting it until you hear a second click to re-engage the magnetic operator.

Integral magnetic blinds windows

FAQs

Q: How often should I clean my magnetic window blinds?

A: The frequency of cleaning your magnetic window blinds depends on how dusty or dirty they get. As a general rule, you should clean your magnetic window blinds every one to two weeks with a damp cloth or a mild cleaner. You should also clean them with vinegar or bleach diluted with water whenever they are stained or discolored.

Q: How do I prevent my magnetic window blinds from getting bent or damaged?

A: The best way to prevent your magnetic window blinds from getting bent or damaged is to avoid putting any pressure or impact on them, such as leaning on them, slamming the door, or hitting them with objects. You should also avoid exposing them to extreme heat or cold, as this might affect their magnetism or shape.

Q: How do I install magnetic window blinds?

A: Installing magnetic window blinds is very easy and does not require any drilling or hardware. All you need to do is measure your window frame, cut the blind strip to fit, peel off the adhesive backing, and press it firmly onto the metal frame. Then, attach the operator to the side of the window and slide it up and down to raise and lower the blinds.

Final Thoughts

Fixing your magnetic window blinds doesn’t have to be a hassle. With some simple tools and tips, you can keep your magnetic window blinds in good shape and working properly. Just remember to clean them with a damp cloth or a mild cleaner, straighten them with a screwdriver and pliers, or re-engage them with some super glue and magnets. Your magnetic window blinds will thank you for it!

Adding color to the world, one room at a time. 
© 2023 Huetiful Homes. All rights reserved.