If your Bali blinds are uneven because of the cords that control the movement of the blinds, you can try to adjust them to make them level. The cords may be uneven because of wear and tear, improper installation, or accidental pulling. To fix this problem, you need to:
- Lower the blinds and close the slats completely. This will make them easier to handle and adjust.
- Locate the cord lock mechanism on the top rail of the blinds. This is where the cords enter and exit the blinds.
- Use a flathead screwdriver to gently pry open the cord lock cover and expose the cords inside.
- Find the cord that is shorter or longer than the others and pull it gently until it matches the length of the other cords.
- Test the blinds by raising and lowering them and checking if they are level.
- Replace the cord lock cover and snap it back into place.
How To Fix Uneven Bali Blinds Caused By Brackets
If your Bali blinds are uneven because of the brackets that hold them on the wall, you can try to adjust them to make them level. The brackets may be uneven because of improper installation, shifting of the wall, or damage to the brackets. To fix this problem, you need to:
- Lower the blinds and close the slats completely. This will make them easier to handle and adjust.
- Remove the valance and the cord anchors from the wall.
- Remove the shade from the wall by gently twisting the header bar up and away from the wall to pop it loose from the brackets.
- Use a level to check if the brackets are level and aligned. If not, use a screwdriver to loosen or tighten the screws that hold them on the wall until they are level and aligned.
- Reattach the shade to the brackets by sliding it back into place until it snaps securely.
- Replace the cord anchors and the valance.
How To Fix Uneven Bali Blinds Caused By Slats
If your Bali blinds are uneven because of the slats that form the body of the blinds, you can try to adjust them to make them level. The slats may be uneven because of bending, warping, or sagging of the material. To fix this problem, you need to:
- Lower the blinds and close the slats completely. This will make them easier to handle and adjust.
- Locate the end caps on both ends of each slat. These are small plastic pieces that cover the holes where the cords run through.
- Use a flathead screwdriver to gently pry off the end caps and expose the cords inside.
- Find the slat that is higher or lower than the others and pull or release its cord until it matches the height of the other slats.
- Test the blinds by tilting them and checking if they are level.
- Replace the end caps and snap them back into place.
That’s A Wrap!
We hope you enjoyed this post and learned how to fix uneven Bali blinds with ease. If you have any questions or comments, feel free to leave them below. And don’t forget to check out our other posts on home decor and lifestyle topics. We have tons of tips and tricks to make your home beautiful and cozy. See you soon!
Dale is the colorful mind behind HuetifulHomes.com, where he shows you how to create a home that is as fun and fabulous as you are. He has a passion for color and a knack for DIY, with years of interior design experience he shares his tips and tricks on how to create a home that reflects your personality and style. He believes that color is the key to happiness, and he wants to help you make your home more Huetiful.
