Are you tired of your curtains being too long or too short for your windows? Do you want to change the look and feel of your rooms with a simple adjustment? If so, you might be wondering how to let curtains down without damaging them or hiring a professional. Well, you’re in luck, because we have the answers for you!
How to let curtains down depends on the type of curtains you have, the length you want, and the tools you need. In general, you can either lower the curtain rod, hem the curtain fabric, or use curtain clips to adjust the length.
In this blog post, we’ll show you how to let curtains down for different types of curtains, such as eyelet, blinds, and grommet curtains. We’ll also give you some tips and tricks to make the process easier and more fun. So grab your scissors, tape measure, and sewing kit, and let’s get started!
How to Let Eyelet Curtains Down
Eyelet curtains are also known as ring-top curtains, because they have metal rings at the top that slide over a curtain rod. They are easy to hang and create a modern and elegant look for your windows. However, they can also be tricky to adjust in length, because you can’t just cut off the excess fabric without ruining the rings.
Here are the steps to let eyelet curtains down:
- Measure how much you want to shorten or lengthen your curtains. Use a tape measure to measure from the bottom of the curtain rod to the desired length. Mark this point on each panel with a pin or chalk.
- Remove the curtains from the rod and lay them flat on a large surface, such as a table or floor. Make sure the front side is facing down and the lining side is facing up.
- Fold the bottom edge of each panel up to the marked point and pin it in place. This will create a new hemline for your curtains.
- Cut off the excess fabric below the pins, leaving about 1 inch (2.5 cm) for seam allowance. Be careful not to cut through the rings or the stitching that holds them in place.
- Sew along the new hemline with a sewing machine or by hand, using a matching thread color and a straight stitch. Remove the pins as you go along.
- Iron the new hem to make it flat and neat.
- Hang your eyelet curtains back on the rod and admire your work!
How to Let Blinds Down
Blinds are another popular type of window covering that can be adjusted in length and angle. They come in different styles, such as Venetian, mini, micro, pleated, and cellular blinds. They usually have a single string or a continuous cord loop that controls their movement.
Here are the steps to let blinds down:
- Lower the blinds by pulling on the string or cord at an angle. Depending on your blinds’ mechanism, you may need to pull it to the right or left to unlock it from its position. Then, release some slack on the string or cord to bring the blinds down to your desired level.
- Lock the blinds in place by pulling on the string or cord in the opposite direction. This will activate the locking mechanism and prevent the blinds from moving up or down.
- Adjust the angle of the slats by rotating a wand or pulling on two parallel strings. This will allow you to control how much light and privacy you want in your room.
- Raise the blinds by pulling on the string or cord towards you and lifting them up to your desired height. Then, lock them in place by pulling on the string or cord in the opposite direction.
How to Let Grommet Curtains Down
Grommet curtains are similar to eyelet curtains, except they have larger metal rings that create bigger folds in the fabric. They are also easy to hang and create a casual and cozy look for your windows. However, they can also be difficult to adjust in length, because you can’t just cut off the excess fabric without ruining the rings.
Here are the steps to let grommet curtains down:
- Measure how much you want to shorten or lengthen your curtains. Use a tape measure to measure from the bottom of the curtain rod to the desired length. Mark this point on each panel with a pin or chalk.
- Remove the curtains from the rod and lay them flat on a large surface, such as a table or floor. Make sure the front side is facing down and the lining side is facing up.
- Fold the bottom edge of each panel up to the marked point and pin it in place. This will create a new hemline for your curtains.
- Cut off the excess fabric below the pins, leaving about 1 inch (2.5 cm) for seam allowance. Be careful not to cut through the rings or the stitching that holds them in place.
- Sew along the new hemline with a sewing machine or by hand, using a matching thread color and a straight stitch. Remove the pins as you go along.
- Iron the new hem to make it flat and neat.
- Hang your grommet curtains back on the rod and admire your work!
FAQs
Q: How do I know what length to make my curtains?
A: The length of your curtains depends on your personal preference and the style of your room. However, there are some general guidelines you can follow:
- For a formal and elegant look, let your curtains touch the floor or even puddle slightly on it.
- For a casual and cozy look, let your curtains hang about 1 inch (2.5 cm) above the floor or just below the windowsill.
- For a modern and sleek look, let your curtains hang about 6 inches (15 cm) below the windowsill or halfway between the windowsill and the floor.
Q: How do I measure my windows for curtains?
A: To measure your windows for curtains, you need to measure the width and length of your window, as well as the height of your curtain rod. Here are the steps:
- Measure the width of your window from one end of the frame to the other. Add about 6 inches (15 cm) to this measurement to allow for some overlap and fullness in your curtains.
- Measure the length of your window from the top of the frame to where you want your curtains to end. Add about 4 inches (10 cm) to this measurement to allow for some clearance and hemming in your curtains.
- Measure the height of your curtain rod from the floor to where it is mounted on the wall. Subtract this measurement from the length measurement you got in the previous step. This will give you the final length of your curtains.
Q: How do I hem my curtains without sewing?
A: If you don’t have a sewing machine or don’t want to sew by hand, you can still hem your curtains using some alternative methods, such as:
- Using iron-on hem tape or fabric glue. These are adhesive products that can bond two pieces of fabric together with heat or pressure. Just follow the instructions on the package and apply them along the edge of your fabric before folding and pressing it in place.
- Using curtain clips or rings. These are metal or plastic clips or rings that can attach to your curtain rod and hold your fabric in place. Just fold your fabric to the desired length and clip or ring it along the top edge.
- Using safety pins or Velcro. These are simple and cheap ways to secure your fabric in place without damaging it. Just fold your fabric to the desired length and pin or stick it along the top or bottom edge.
Final Thoughts
We hope this blog post has helped you learn how to let curtains down for different types of curtains. Whether you want to shorten, lengthen, or adjust your curtains, you can do it yourself with some simple tools and techniques. Remember to measure twice, cut once, and have fun!
If you enjoyed this post, please share it with your friends and family who might also be interested in learning how to let curtains down. And don’t forget to check out our other posts on home decor and lifestyle topics at Huetifulhomes.com!
Dale is the colorful mind behind HuetifulHomes.com, where he shows you how to create a home that is as fun and fabulous as you are. He has a passion for color and a knack for DIY, with years of interior design experience he shares his tips and tricks on how to create a home that reflects your personality and style. He believes that color is the key to happiness, and he wants to help you make your home more Huetiful.
