How to Steam Clean Fabric Blinds

Hey, gorgeous! Are you looking for a way to make your fabric blinds look fresh and clean? Steam cleaning fabric blinds can help you achieve that. Steam cleaning can remove dust, dirt, stains, and odors from your fabric blinds without using harsh chemicals or damaging the fabric.

But how do you steam clean fabric blinds without ruining them or burning yourself? Don’t worry, we’ve got you covered. In this post, we’ll show you how to steam clean fabric blinds in four easy steps. Whether you have vertical or horizontal fabric blinds, we’ll help you find the best way to steam clean them.

To steam clean fabric blinds, you need to fill the steam cleaner with water, attach the brush attachment, pre-test a hidden area, and move the brush across the blinds. Then, you need to wipe the blinds with a clean cloth to remove the dirt and moisture.

Fill the Steam Cleaner with Water

The first step is to fill the steam cleaner with water using a funnel. Always use distilled water because it’s safe for all types of steam cleaners. Tap water may contain minerals or impurities that can clog or damage the steam cleaner.

To fill the steam cleaner with water, follow these steps:

• Locate the water tank on your steam cleaner. It may be on the side, on the back, or on the bottom of the unit.
• Remove the cap or lid of the water tank and set it aside.
• Insert a funnel into the opening of the water tank and pour distilled water into it until it reaches the fill line.
• Replace the cap or lid of the water tank and secure it tightly.

Attach the Brush Attachment

The next step is to attach the brush attachment to the steam hose if your model accepts attachments. The brush attachment can help loosen and lift the dust and dirt from your fabric blinds. If your model does not accept attachments, you can skip this step.

To attach the brush attachment, follow these steps:

• Locate the end of the steam hose on your steam cleaner. It may be on the top, on the front, or on the side of the unit.
• Locate the brush attachment that came with your steam cleaner. It may be stored on the unit itself or in a separate bag or box.
• Align the brush attachment with the end of the steam hose and push it until it clicks into place.
• Make sure that the brush attachment is securely attached and does not wobble or fall off.

Pre-Test a Hidden Area

The third step is to pre-test a hidden area to make sure that the steamer will not damage or discolor your fabric blinds. Some fabrics may be too delicate or sensitive for steam cleaning and may shrink, warp, or fade when exposed to high temperatures.

To pre-test a hidden area, follow these steps:

• Plug in the steamer into an outlet and turn it on.
• Wait for a few minutes until it heats up and produces steam.
• Find a hidden area of your fabric blind that is not visible from outside or inside. It may be on the back, on the side, or on the bottom of your blind.
• Hold the steamer about six inches away from your fabric blind and press the trigger to release some steam.
• Check for any signs of damage or discoloration on your fabric blind. If there are none, you can proceed to steam clean your blind. If there are any, you should stop and use another method of cleaning.

Move the Brush Across the Blinds

The final step is to move the brush across your fabric blinds allowing the steam to loosen and lift off dust and dirt. Start cleaning at one end of your blind and work your way across using smooth, steady strokes from top to bottom.

To move the brush across your blinds, follow these steps:

• Hold your steamer about six inches away from your fabric blind and press the trigger to release some steam.
• Move your steamer slowly across one section of your blind from top to bottom.
• Repeat until you have covered all sections of your blind.
• Turn over your blind if it has two sides and repeat on both sides.

FAQs

Q: How do I wipe my fabric blinds after steam cleaning them?

A: To wipe your fabric blinds after steam cleaning them, you need to use a clean microfiber cloth or towel. Gently wipe each section of your blind from top to bottom to remove any dirt and moisture that may have been left behind by the steamer. You can also use a hair dryer on low heat setting to speed up drying.

Q: How often do I need to steam clean my fabric blinds?

A: Steam cleaning your fabric blinds is not something that you need to do regularly. You only need to do it if your blinds are very dirty or stained. However, you should dust your blinds at least once a month to prevent dust buildup and keep them looking fresh.

Q: What are the benefits of steam cleaning fabric blinds?

A: Steam cleaning fabric blinds has many benefits, such as:

• It can remove dust, dirt, stains, and odors from your fabric blinds without using harsh chemicals or detergents.
• It can kill germs, bacteria, and allergens that may be lurking on your fabric blinds and improve your indoor air quality.
• It can restore the color and texture of your fabric blinds and make them look new again.

Wrap Up

Steam cleaning fabric blinds is a simple and effective way to make your window treatments look fresh and clean. By following these tips and tricks, you can steam clean your fabric blinds in minutes and enjoy their convenience and comfort.

Whether you have vertical or horizontal fabric blinds, we have the ideal solution for you. Browse our selection of fabric blinds online or contact us today to get a free consultation with one of our design experts.

Dale

Dale is the colorful mind behind HuetifulHomes.com, where he shows you how to create a home that is as fun and fabulous as you are. He has a passion for color and a knack for DIY, with years of interior design experience he shares his tips and tricks on how to create a home that reflects your personality and style. He believes that color is the key to happiness, and he wants to help you make your home more Huetiful.