How To Wash Blinds In Bathtub

Blinds are a practical and stylish way to dress up your windows and control the amount of light and privacy in your rooms. However, over time, they can accumulate dust, dirt, grease, and even mould that can make them look dull and dirty. If you want to give your blinds a thorough cleaning, you may be able to wash them in your bathtub. This is a simple and effective method that can save you time and money compared to hiring a professional cleaner.

How to wash blinds in bathtub: To wash blinds in bathtub, you need to remove them from the window, dust and vacuum them, fill the tub with warm water and soap or detergent, soak the blinds for 10 to 60 minutes, scrub them with a cloth or a brush, rinse them with clean water, and hang them to dry.

Remove the blinds from the window

The first step to wash your blinds in the bathtub is to remove them from the window. This may vary depending on the type and model of your blinds, but generally, you need to do the following:

• Lower the blinds all the way and close the slats.
• Unhook the blinds from the brackets that hold them in place. You may need to use a screwdriver or a plier to loosen some screws or clips.
• Carefully lift the blinds off the window and place them on a flat surface or a tarp.

Dust and vacuum the blinds

The next step is to dust and vacuum the blinds to remove any loose dirt and dust that may clog your bathtub drain or make the water dirty. To do this, you need to do the following:

• Run a vacuum cleaner with a brush attachment over both sides of the blinds. If you have Venetian blinds, make sure to get into the gaps between the slats.
• Wipe down both sides of the blinds with a damp microfiber cloth. If you have Venetian blinds, turn the slats so they are fully open and wipe each one individually.

Fill the tub with warm water and soap or detergent

The third step is to fill the tub with warm water and soap or detergent that can dissolve dirt and grease from your blinds. To do this, you need to do the following:

• Place a towel or a mat at the bottom of the tub. This will prevent your blinds from scratching or damaging the tub and vice versa.
• Fill the tub with enough warm water to cover your blinds. Don’t use hot water as this can damage or shrink some fabrics or materials.
• Add about two squirts of dish soap or 1/4 cup of laundry detergent to the water and mix well. You can also add 1/4 cup of white vinegar or baking soda for extra cleaning power.

Soak the blinds for 10 to 60 minutes

The fourth step is to soak the blinds for 10 to 60 minutes, depending on how dirty they are and what material they are made of. To do this, you need to do the following:

• Place your blinds in the tub and make sure they are fully submerged in the water. You may need to fold or roll them if they are too long or wide for your tub.
• Let them soak for 10 to 60 minutes, stirring occasionally to loosen any dirt or stains. The longer you soak them, the cleaner they will be.
• If you have fabric blinds, don’t soak them for longer than 20 minutes if they have a top rail that can rust or damage.

Scrub them with a cloth or a brush

The fifth step is to scrub them with a cloth or a brush to remove any stubborn dirt or stains that remain after soaking. To do this, you need to do the following:

• Drain the dirty water from the tub and refill it with clean water.
• Take out your blinds and lay them flat on a clean surface or hang them on a clothesline.
• Scrub both sides of your blinds with a soft cloth or a sponge dipped in the clean water. If you have Venetian blinds, scrub each slat individually.
• For tough stains or mould, use a soft-bristled brush or an old toothbrush to gently scrub them away.

Rinse them with clean water

The sixth step is to rinse them with clean water to remove any soap residue or dirt that may still be on your blinds. To do this, you need to do the following:

• Drain the tub again and refill it with fresh water.
• Put your blinds back in the tub and swish them around to rinse them off.
• If you have Venetian blinds, you can also rinse them by opening them so all the slats are at the top and running warm water over them.

Hang them to dry

The final step is to hang them to dry completely before putting them back on the window. To do this, you need to do the following:

• Take out your blinds from the tub and gently shake off any excess water.
• Hang your blinds on a clothesline or a rod in a well-ventilated area. Avoid direct sunlight or heat sources that may fade or warp your blinds.
• Let your blinds dry completely before rolling them up again. This may take a few hours or overnight, depending on the weather and the material of your blinds.

FAQs

Q: How often should I wash my blinds in the bathtub?

A: The frequency of washing your blinds in the bathtub depends on how dirty they get and what material they are made of. Generally, you should wash your blinds in the bathtub once or twice a year, or whenever they look visibly dirty or stained. You should also dust and vacuum your blinds regularly to keep them clean and fresh.

Q: What types of blinds can I wash in the bathtub?

A: You can wash most types of blinds in the bathtub, such as vinyl, aluminum, plastic, or fabric blinds. However, some types of blinds may not be suitable for washing in the bathtub, such as wood, faux wood, bamboo, or silk blinds. These types of blinds may warp, crack, fade, or shrink when exposed to water or heat. To be safe, always check the manufacturer’s instructions or care label before washing your blinds in the bathtub.

Q: What are some tips for washing my blinds in the bathtub?

A: Here are some tips for washing your blinds in the bathtub:

• Use mild soap or detergent that is safe for your blind’s material. Avoid using harsh chemicals or bleach that may damage or discolor your blinds.
• Test a small inconspicuous area of your blind with the soap or detergent before washing the whole blind. This will help you avoid any adverse reactions or surprises.
• Don’t scrub too hard or use abrasive tools that may scratch or tear your blinds. Use gentle strokes and soft materials to clean your blinds.
• Don’t wring or twist your blinds to remove water. This may damage or deform your blinds. Instead, gently squeeze or shake off any excess water.

And that’s a wrap!

We hope this post has helped you learn how to wash blinds in bathtub. With these easy steps, you can give your blinds a new lease of life and make them look as good as new. If you have any questions or comments, feel free to leave them below. And don’t forget to check out our other posts on home decor and lifestyle topics. Happy washing!

Dale

Dale is the colorful mind behind HuetifulHomes.com, where he shows you how to create a home that is as fun and fabulous as you are. He has a passion for color and a knack for DIY, with years of interior design experience he shares his tips and tricks on how to create a home that reflects your personality and style. He believes that color is the key to happiness, and he wants to help you make your home more Huetiful.